Search for collections on Wintec Research Archive

Optimization of pipeline reducer using computational fluid dynamics (CFD) modelling

Citation: UNSPECIFIED.

Full text not available from this repository. (Request a copy)

Abstract

Water mains are part of a drainage network that generally supplies fresh water to the households within council (municipal) limits. Most councils set a benchmark minimum water pressure (kPa) and a flow rate (l/min) that must be delivered to households. A typical drainage network may consist of straight pipe with different bends, reducers, expansions and several fittings, all of which contribute to loss of pressure in the fluid system. The main objective of this paper is to compare different gradients of reducers using Applied Computational Modelling techniques. This comparison is performed in terms of pressure drop across the section, the total pressure on the reducing face and regular forces on the inner face of each reducer on two types of reducers, i.e. Concentric and Eccentric. Methods: In this paper, computational analyses using CFD tools are applied to a pipe from a typical water mains line consisting of a concentric reducer that generally holds a certain amount of pressure. Comparison between different gradients of reducing face of both concentric and eccentric reducers has been performed in terms of pressure drop across the section, the total pressure on the reducing face and normal forces on the inner face of each reducer. Polyethylene (PE) stub flanges and galvanized backing rings are attached to the pipe. The material properties for the pipe and the reducer are set to high-density polyethylene (HDPE), and they are butt-welded together. The simulation and analysis are performed using SOLIDWORKS-CFD/FE software. Findings: The simulation results show the predicted flow trajectories of the fluid flowing through both reducers depicting difference in flow trajectories and their consequent effect on fluid system and the system’s structure in terms of Pressure drop, water force etc. when the reduction is changed from concentric to eccentric. Applications: The quantified flow simulation is used to optimize the section design according to the dynamic pressure head required. The results show that the optimized reducer serves better than conventional reducers.

Item Type: Journal article
Uncontrolled Keywords: Water main, computational fluid dynamics, concentric and eccentric reducers
Subjects: T Technology > T Technology (General)
Divisions: Schools > Centre for Engineering and Industrial Design
Depositing User: Hong Zhou
Date Deposited: 05 Feb 2021 00:43
Last Modified: 21 Jul 2023 09:13
URI: http://researcharchive.wintec.ac.nz/id/eprint/7716

Actions (login required)

View Item
View Item