Items where Department/School is "Schools > Centre for Engineering and Industrial Design" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: NULL | A | C | E | H | K | M | Z
Number of items: 31.

NULL

UNSPECIFIED (2018) Heretaunga Springs: Gains and losses of stream flow to groundwater on the Heretaunga Plains. Favourable review or citation

UNSPECIFIED (2018) Member spotlight on Paul D. Ewart. Favourable review or citation

A

AL-Rawi, Mohammad (2018) The Australasian association for engineering education. The Australasian Association For Engineering Education, Waikato University / WINTEC Hamilton , 9-12 December, 2009.

AL-Rawi, Mohammad (2018) Engineers for the future; accounting for diversity. The Australasian Association For Engineering Education, Waikato University / WINTEC Hamilton, 9-12 December 2018.

AL-Rawi, Mohammad (2018) Reflecting on our own learning: incorporating diverse worldviews into teaching and learning activities. Australasian Association of Engineering Education (AAEE) 2018, Waikato University / WINTEC Hamilton, 9-12 December, 2018.

AL-Rawi, Mohammad (2018) Residential air quality improvement system. Research Presentation Event -Wintec, Wintec, Hamilton, New Zealand, 14 November 2018.

AL-Rawi, Mohammad and Khanna, Jai and Lazonbay, Annette (2018) Reflecting on our own learning: incorporating diverse worldviews into teaching and learning activities. The Australasian Association For Engineering Education, Waikato University - Wintec, Hamilton, New Zealand , 9 December – 12 December 2019.

AL-Rawi, Mohammad and Smith, Callan (2018) Residential Air Quality Improvement Using UV lights. Building and Environment . ISSN 0360-1323 (Submitted)

AL-Rawi, Mohammad and Smith, Callan (2018) Residential air quality improvement system: For healthy living. Innovation in Healthy Living & Ageing Well, Hamilton, New Zealand, 13 -14 November, 2018.

C

Chakrabarti, Bhujanga (2018) NZ Electricity Market. IEEE Power System Economics Committee, , Portland, OA, 8 August, 2018. (Unpublished)

E

Ewart, Paul (2018) CEID Research Symposium Series. CEID Research Symposium Series., Room. G1.23 G Block, Rotokauri Campus Hamilton., 1 November, 2018. (Unpublished)

Ewart, Paul (2018) Manual drafting. Is it still relevant? 2018 Joint NZDE/BEngTEch tutors forum., WelTec, Petone, Wellington, NZ, 14 February 2018. (Unpublished)

Ewart, Paul (2018) Presentation to Technical University of Liberec academic and research staff. Wintec CEID and research , Technical University of Liberec, Liberec, Czech Republic., 10 October, 2018. (Unpublished)

Ewart, Paul (2018) The particulate injection moulding fabrication process: Are micro-scale products viable. MaD2018: A Collaborative Future for NZ Manufacturing and Design, ANZ Viaduct Event Centre, 161 Halsey Street, Viaduct Harbour, Auckland., Monday 21 – Tuesday 22 May, 2018.

Ewart, Paul (2018) The use of particulate injection moulding for fabrication of sports and leisure equipment from titanium metals. 12th conference of the International Sports Engineering Association, Brisbane, Queensland, Australia., 26–28 March 2018..

Ewart, Paul and Capek, Lukas (2018) Erasmus mobility project collaboration. Nil. (Unpublished)

Ewart, Paul and Claus, Joens (2018) Thermal processing in powder metallurgy. Metal injection moulding and binder jetted metal 3D printing. CEID Research International Speaker Series., L Block, Rotokauri Campus, Hamilton., 30 May 2018. (Unpublished)

Ewart, Paul and He, Jianan (2018) Design pipe bracket for vessel with using Titanium metal in marine environment. Undergraduate student work (Unpublished)

Ewart, Paul and Huang, Jiarui (2018) The Development of an Aerodynamic Body System for the Existing Single Seat Electric Vehicle. Undergraduate student work (Unpublished)

Ewart, Paul and Moridnejad, Maryam and Zhou, Hong and Chakrabarti, Bhujanga (2018) CEID research: Recent, current and future direction. Wintec Research (Poster) Night 2018, Hamilton, New Zealand, 4 September, 2018. (Unpublished)

Ewart, Paul and Travieso, Freddy (2018) Designing and Manufacturing of a hand operated plastic injection moulding machine envisioned for the mesoscale range. Undergraduate student work (Unpublished)

H

Hunt, Tim D. (2018) Cacophonometer update. The Cacophony Project .

K

Kim, Hyun-Chan (2018) The development of demand responsive transport service for older people in NZ rural areas. IPENZ NZ Modelling User Group (NZMUGS) Conference, Auckland, New Zealand, 17-18 September, 2018.

Kim, Hyun-Chan (2018) The development of demand responsive transport service for older people in NZ rural areas: Preliminary Case Study in Thames. 2018 NZMUGS New Zealand Modelling User Group, Auckland, New Zealand , 17-18 September 2018. (In Press)

Kim, Hyun-Chan and Zhang, Yuxin (2018) A study of road accidents involving international visitors: Case study in New Zealand. Journal of the Eastern Asia Society for Transportation Studies, 12 . pp. 1813-1829. ISSN 1881-1124

M

Moridnejad, Maryam (2018) Chair of conference session for AAEE2018. The 29th Australasian Association for Engineering Education Conference 2018, Hamilton, New Zealand, 9-12 December, 2018.

Moridnejad, Maryam (2018) The occurrence and origin of salinity in non-coastal groundwater in the Waikato region. NZ Hydrological Society & Meteorological Society of NZ Joint Conference, Christchurch, New Zealand, 4-7th Dec, 2018.

Z

Zhou, Hong (2018) An Introduction on 2018 research work. 2018 CEID Research Symposium, Wintec, Hamilton, New Zealand, 1 November 2018.

Zhou, Hong (2018) Microstructure and phase composition of titanium coatings plasma sprayed with a shroud. International Conference on Materials Applications and Engineering 2017 (ICMAE2017), Qingdao, China , 25 - 27 Aug 2017.

Zhou, Hong (2018) Porosity and micro-hardness of shrouded plasma sprayed titanium coatings. 2018 International Conference on Functional Materials, Shanghai, China, :Author.

Zhou, Hong and Li , Fei and Wang, Jun (2018) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. Key Engineering Materials . (In Press)

This list was generated on Sat Feb 22 01:03:21 2020 NZDT.