Items where Department/School is "Schools > Centre for Engineering and Industrial Design" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | D | E | H | K | L | M | P | Z
Number of items: 31.

A

AL-Rawi, Mohammad and Lazonbay, Annette and Khanna, Jai and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. Australasian Association for Engineering Education 2019, Brisbane, Australia , 9-11 December, 2019.

AL-Rawi, Mohammad and Mylarapu, Akhil and Khanna, Jai (2019) Thermal Power Stirling - Green Heat Engine. MaD2019: A Collaborative Future for NZ Manufacturing and Design,, Auckland, New Zealand, 20-21 May, 2019.

AL-Rawi, Mohammad and Smith, Callan and Ewart, Paul (2019) Residential air quality improvement using UV lights. MAD2019, Auckland, New Zealand, 20 - 21 May, 2019.

AL-Rawi, Mohammad and Zheng, Li and Ewart, Paul and Best, Russell (2019) Aerodynamic effect of Polo Helmet — A CFD study. Polotec2019, Hamilton, New Zealand , 22 November, 2019. (Unpublished)

C

Chakrabarti, Bhujanga (2019) Modelling of firm offer from combined wind and hydro generations. AUPEC 9 th Australasian Universities Power Engineering Conference, Momi Bay Fiji 2019, 26-29th November, 2019. (Submitted)

Chakrabarti, Bhujanga (2019) Optimisation in NZ electricity market. Mathematics in Electrical Engineering, Indian Institute of Technology, IIT, Kanpur, India, 5 February, 2019. (Unpublished)

Chakrabarti, Bhujanga and Phillips, Brent and AL-Rawi, Mohammad and Kumari, , Sarla and Althobaiti, Thamer (2019) Modelling of firm offer from combined wind and hydro generations. The Australasian Universities Power Engineering Conference (AUPEC), Marriott Resort, Nandi, Fiji, 26-29 November, 2019.

Chakrabarti, Bhujanga B. and AL-Rawi, Mohammad (2019) Modelling of Firm Offer from Combined Wind and Hydro Generations. 29th of AUPEC , Marriott Resort, Fiji , 26-29 November, 2019.

Chand, Praneel and Assaf, Mansour (2019) Towards a hybrid powered passenger boat utilizing fuzzy controller. Engineering and Applied Science Research, 46 (2). pp. 142-150. ISSN 2539-6161

D

Daniel, Scott and AL-Rawi, Mohammad and Pearson, Ashlee and Symes, Mark and Goldfinch, Tom (2019) WORKSHOP: Stop lecturing about active learning: integrating good teaching practices into AAEE conference sessions. Australasian Association for Engineering Education 2019, Brisbane, Australia , 9-11 Dec 2019.

E

Ewart, Paul (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. The New Zealand Manufacturing and Design (MaD) Conference, Cordis Auckland, New Zealand, 20-21 May, 2019.

Ewart, Paul (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. 4th International MERGE Technologies Conference (IMTC), MERGE Technology Centre, Chemnitz University of Technology, Chemnitz, Germany, 18 - 19 September, 2019.

Ewart, Paul (2019) A comparison of processing techniques for producing prototype injection moulding inserts. The New Zealand Manufacturing and Design (MaD) Conference , Cordis Auckland, New Zealand, 20-21 May, 2019.

Ewart, Paul and AL-Rawi, Mohammad and Kim, Hyun-Chan (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. MaD2019: Future-proofing New Zealand’s Manufacturing and Design Economy, Auckland, New Zealand , 21-22 May, 2019.

Ewart, Paul and Louie, Ken (2019) Supporting community engagement through teaching, student projects and research. 2019 Institutes of Technology & Polytechnics Research Symposium Whanaungatanga, Eastern Institute of Technology, Napier, 15-16 April, 2019 .

Ewart, Paul and Louie, Ken and Zhou, Hong (2019) Supporting community engagement through teaching, student projects and research. 2019 ITP research symposium, Napier, New Zealand, 14-16 April, 2019.

H

Huang, Jiajun and Yang, Shuo and Xu, Chang (2019) A Visual Content-Based Approach for Automatic Evaluation of Student Assignment Reports. Australasian Association for Engineering Education 2019, Brisbane, Australia , 9-11 December, 2019.

K

Khanna, Jai and AL-Rawi, Mohammad and Moridnejad, Maryam and Kumari, Sarla (2019) Incorporating effective teaching pedagogies to improve learning and teaching approaches globally. Australasian Association for Engineering Education 2019, Brisbane, Australia , 9-11 December, 2019.

Kim, Hyun-Chan and Ewart, Paul (2019) Community-based Engineering research: Why aging New Zealanders Living in rural need better transport service. 2019 Whanaungatanga ITP Research Symposium, Napier, New Zealand, 15-16 April, 2019.

Kim, Hyun-Chan and Kim, Tae Hwan (2019) Choice f micro-mobility: Case studies of ta public bicycle sharing system in New Zealand. 24th International Conference of Hong Kong Society for Transportation Studies, Hong Kong, 14-16 December, 2019.

Kim, Hyun-Chan and Moridnejad, Maryam (2019) Sustainable Urban Development: Implementation of Public Bike Sharing System - NZ Case Studies. 2019 Whanaungatanga ITP Research Symposium, Napier, New Zealand, 15-16 April, 2019.

Kumari, Sarla and AL-Rawi, Mohammad and Khanna, Jai and Moridnejad, Maryam (2019) Motivation and Engagement: Māori and Pasifika learners. Australasian Association for Engineering Education 2019, Brisbane, Australia , 9-11 Dec 2019.

L

Louie, Ken and Ewart, Paul and Khanna, Jai (2019) A double-edged sword: Use of computer algebra systems in first-year Engineering Mathematics and Mechanics courses. 30th Australasian Association of Engineering Education Conference, Brisbane, Australia, 8-11 December, 2019.

M

Moridnejad, Maryam (2019) Stream temperature modeling and fiber optic temperature sensing to characterize groundwater discharge. Groundwater . ISSN 1745-6584

P

Phillips, Brent (2019) Embedding Māori achievement: An innovative example. 2019 NZDE - BEngTech Joint Forum, Ara Institute of Canterbury, 11-12 February, 2019. (Unpublished)

Z

Zhou, Hong (2019) Porosity and Micro-Hardness of Shrouded Plasma Sprayed Titanium Coatings. Key Engineering Materials, 793 . pp. 73-77. ISSN 1662-9795

Zhou, Hong (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. 4th International MERGE Technologies Conference (IMTC), MERGE Technology Centre, Chemnitz University of Technology, Chemnitz, Germany, 18 - 19 September, 2019.

Zhou, Hong (2019) A comparison of processing techniques for producing prototype injection moulding inserts. MaD2019: Future-proofing New Zealand’s Manufacturing and Design Economy, Auckland, New Zealand, 20-26 May, 2019.

Zhou, Hong and Ewart, Paul (2019) Microstructural Characterization of Shrouded Plasma Sprayed Titanium Coatings. 2019 International Conference on Advanced Materials and Applications, Ningbo, China, 10-13/April/2019.

Zhou, Hong and Ewart, Paul (2019) Reflection on the flipped teaching and student teaching practice. 2019 NZDE/BENGTECH Teaching and research forum, Ara Institute of technology, 11-12 February, 2019.

Zhou, Hong and Liu, Zhi (2019) Microstructural Characterization of Shrouded Plasma-Sprayed Titanium Coatings. J. Manuf. Mater. Process. , 3 (1). ISSN 2504-4494

This list was generated on Sat Sep 26 01:03:18 2020 NZST.