Browse by Author/Person

Ewart, Paul (2017) 2017 Student projects in support of final year BEngTech students at Wintec. Undergraduate student work (Unpublished)

AL-Rawi, Mohammad and Zheng, Li and Ewart, Paul and Best, Russell (2019) Aerodynamic effect of Polo Helmet — A CFD study. Polotec2019, Hamilton, New Zealand , 22 November, 2019. (Unpublished)

Ewart, Paul (2018) CEID Research Symposium Series. CEID Research Symposium Series., Room. G1.23 G Block, Rotokauri Campus Hamilton., 1 November, 2018. (Unpublished)

Ewart, Paul and Moridnejad, Maryam and Zhou, Hong and Chakrabarti, Bhujanga (2018) CEID research: Recent, current and future direction. Wintec Research (Poster) Night 2018, Hamilton, New Zealand, 4 September, 2018. (Unpublished)

Ewart, Paul (2020) CEID research: Recent, current and future direction. Wintec Researcher Event, Hamilton, New Zeland, 15th October, 2020. (Unpublished)

Kim, Hyun-Chan and Ewart, Paul (2019) Community-based Engineering research: Why aging New Zealanders Living in rural need better transport service. 2019 Whanaungatanga ITP Research Symposium, Napier, New Zealand, 15-16 April, 2019.

Ewart, Paul and Verbeek, Casparus J. and Seokyoung, Ahn (2017) Comparative Rheology Techniques for Assessment of MIM Titanium Metal Powder Feedstocks. 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing - PMTi 2017, Xi’an, P.R. China., 8 to 10 September 2017. (Submitted)

Ewart, Paul (2017) Competition V Connectivity in the Market Place. 2017 Joint NZDE/BEngTech Forum , WelTec Petone, 13-14 February, 2017. (Unpublished)

Ewart, Paul and Duke, Mike (2017) Design and development of a single seat battery electric vehicle. NA. (Unpublished)

Ewart, Paul and He, Jianan (2018) Design pipe bracket for vessel with using Titanium metal in marine environment. Undergraduate student work (Unpublished)

Ewart, Paul (2020) Design-build-use. Expansion in the Waikato. Engineering NZ Multidisciplinary presentation evening., Hamilton, New Zealand, 15 September, 2020. (Unpublished)

Ewart, Paul and Travieso, Freddy (2018) Designing and Manufacturing of a hand operated plastic injection moulding machine envisioned for the mesoscale range. Undergraduate student work (Unpublished)

Ewart, Paul and Huang, Jiarui (2018) The Development of an Aerodynamic Body System for the Existing Single Seat Electric Vehicle. Undergraduate student work (Unpublished)

Ewart, Paul and Alghamdi, Majed and Bakelka, Omar and Alqahtani, Saeed (2017) Enabling Development; design of a the Single Seat Wintec Electric Vehicle.(SSWEV). Undergraduate student work (Unpublished)

Philip, Matt and Ewart, Paul (2020) Engineering gone wild. Cutting edge techniques for polo. EG MAGAZINE, UNSPECIFIED, December 2020.

Ewart, Paul and Capek, Lukas (2018) Erasmus mobility project collaboration. Nil. (Unpublished)

Ewart, Paul and Jull, Harrisson and Kunnemeyer, Rainer (2016) Identification of Contamination Levels and the Microstructure of Metal Injection Moulded Titanium. Key Engineering Materials . ISSN 1662-9795

Ewart, Paul (2018) Manual drafting. Is it still relevant? 2018 Joint NZDE/BEngTEch tutors forum., WelTec, Petone, Wellington, NZ, 14 February 2018. (Unpublished)

Zhou, Hong and Ewart, Paul (2019) Microstructural Characterization of Shrouded Plasma Sprayed Titanium Coatings. 2019 International Conference on Advanced Materials and Applications, Ningbo, China, 10-13/April/2019.

Ewart, Paul (2015) Overview of previous and current research and industry some developments. Centre Research forum., UNSPECIFIED, UNSPECIFIED. (Unpublished)

Ewart, Paul (2018) Presentation to Technical University of Liberec academic and research staff. Wintec CEID and research , Technical University of Liberec, Liberec, Czech Republic., 10 October, 2018. (Unpublished)

Ewart, Paul (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. The New Zealand Manufacturing and Design (MaD) Conference, Cordis Auckland, New Zealand, 20-21 May, 2019.

Ewart, Paul and AL-Rawi, Mohammad and Kim, Hyun-Chan (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. MaD2019: Future-proofing New Zealand’s Manufacturing and Design Economy, Auckland, New Zealand , 21-22 May, 2019.

Zhou, Hong and Ewart, Paul (2019) Reflection on the flipped teaching and student teaching practice. 2019 NZDE/BENGTECH Teaching and research forum, Ara Institute of technology, 11-12 February, 2019.

AL-Rawi, Mohammad and Smith, Callan and Ewart, Paul (2019) Residential air quality improvement using UV lights. MAD2019, Auckland, New Zealand, 20 - 21 May, 2019.

Jull, Harrisson and Ewart, Paul and Kunnemeyer, Rainer and Schaare, Peter (2017) Selective Surface Sintering Using a Laser-Induced Breakdown Spectroscopy System. Journal of Spectroscopy, 2017 .

Ewart, Paul and Louie, Ken (2019) Supporting community engagement through teaching, student projects and research. 2019 Institutes of Technology & Polytechnics Research Symposium Whanaungatanga, Eastern Institute of Technology, Napier, 15-16 April, 2019 .

Ewart, Paul and Louie, Ken and Zhou, Hong (2019) Supporting community engagement through teaching, student projects and research. 2019 ITP research symposium, Napier, New Zealand, 14-16 April, 2019.

Ewart, Paul (2020) Surface engineering by titanium particulate injection mounding. MaDE2020: Synergies in New Zealand Manufacturing, Design and Entrepreneurship, Auckland, New Zealand, 7-8 December, 2020. (Unpublished)

Ewart, Paul (2021) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. Technologies for Lightweight Structures, 3 (1).

Ewart, Paul (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. 4th International MERGE Technologies Conference (IMTC), MERGE Technology Centre, Chemnitz University of Technology, Chemnitz, Germany, 18 - 19 September, 2019.

Ewart, Paul and Claus, Joens (2018) Thermal processing in powder metallurgy. Metal injection moulding and binder jetted metal 3D printing. CEID Research International Speaker Series., L Block, Rotokauri Campus, Hamilton., 30 May 2018. (Unpublished)

Ewart, Paul (2017) Using titanium metal in a marine environment in conjunction with carbon fibre composites. Undergraduate student work (Unpublished)

Ewart, Paul (2019) A comparison of processing techniques for producing prototype injection moulding inserts. The New Zealand Manufacturing and Design (MaD) Conference , Cordis Auckland, New Zealand, 20-21 May, 2019.

Louie, Ken and Ewart, Paul and Khanna, Jai (2019) A double-edged sword: Use of computer algebra systems in first-year Engineering Mathematics and Mechanics courses. 30th Australasian Association of Engineering Education Conference, Brisbane, Australia, 8-11 December, 2019.

Khanna, Jai and Louie, Ken and Ewart, Paul (2019) A double-edged sword: Use of computer algebra systems in first-year Engineering Mathematics and Mechanics courses. AAEE 2019, Brisbane, Australia , 8-11 December, 2019.

Ewart, Paul (2018) The particulate injection moulding fabrication process: Are micro-scale products viable. MaD2018: A Collaborative Future for NZ Manufacturing and Design, ANZ Viaduct Event Centre, 161 Halsey Street, Viaduct Harbour, Auckland., Monday 21 – Tuesday 22 May, 2018.

Ewart, Paul and Louie, Ken and Zhou, Hong (2020) A review of equestrian polo and a methodology for testing the mechanical properties of the mallet. The 13th Conference of the International Sports Engineering Association, Online, 22--26 June, 2020.

Ewart, Paul (2020) A review of equestrian polo and a methodology for testing the mechanical properties of the mallet. The 13th conference of the International Sports Engineering Association (ISEA 2020), Tokyo, Japan/Online, 22-29 June, 2020. (Submitted)

Ewart, Paul (2018) The use of particulate injection moulding for fabrication of sports and leisure equipment from titanium metals. 12th conference of the International Sports Engineering Association, Brisbane, Queensland, Australia., 26–28 March 2018..