Rsetam, Kamal and AL-Rawi, Mohammad and Cao, Zhenwei (2022) Robust composite temperature control of electrical tube furnaces by using disturbance observer. Case Studies in Thermal Engineering, 30 (101781). ISSN 2214157X UNSPECIFIED

AL-Rawi, Mohammad and Auckaili, Amar and Lazonbay, Annette (2021) The role of academic development (Research and Teaching) in enabling quality teaching. [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Dabholkar, Ninad (2021) Generation of Biogas using Fixed-Dome Anaerobic Digester for Small-Scale Industrial Applications in New Zealand. [Poster presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai (2021) Aligning research objectives with student learning outcomes and sustainability objectives in student engineering development project. [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

AL-Rawi, Mohammad and Al-Jumaily, Ahmed and Belkacemi, Djelloul (2021) Do long aorta branches impact on the rheological properties? [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

AL-Rawi, Mohammad (2021) The thermal comfort sweet-spot: A case study in a residential house in Waikato, New Zealand. Case Studies in Thermal Engineering. ISSN 2214157X (In Press) UNSPECIFIED

AL-Rawi, Mohammad (2021) The thermal comfort sweet-spot: A case study in a residential house in Waikato, New Zealand. Case Studies in Thermal Engineering, 28 (101530). ISSN 2214157X UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai and Kumari, Sarla (2021) Developing soft skills to produce work-ready international graduate diploma students in engineering: A comparative study. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad (2021) Residential IEQ improvement using UVGI lights and carbon fibre filters: Mould and relative humidity assessments. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonby, Annette and Smith, Callan (2021) Low-cost residential air quality device using ultraviolet germicidal irradiation (UVGI) light. [Software or database] UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai and Kumari, Sarla (2021) Developing Soft Skills to produce Work-Ready International Graduate Diploma Students in Engineering: a Comparative Study. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Sarla, Kumari and AL-Rawi, Mohammad (2021) Collaborating for a changing future in education. [Item presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

Kumari, Sarla and AL-Rawi, Mohammad (2021) Collaborating for a changing future in education. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Kumari, Sarla and Khanna, Jai and Ariyarathna, Thilanga (2021) Designing a research project that meets industry-defined student learning outcomes. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla and Ariyarathna, Thilanga (2021) Designing a research project that meets industry-defined student learning outcomes. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Ikutegbe, Charles and Auckaili, Amar and Farid, Mohammed (2021) Sustainable Technologies to improve Indoor Air Quality in a Residential House – a Case Study in Waikato, New Zealand- Q1 - Impact Factor = 5.879. Energy and Buildings. (In Press) UNSPECIFIED

Chand, Praneel and AL-Rawi, Mohammad and James, Sebin and Antony, Joseph and Jose, Jobin (2021) A low-cost system for remote access and control of automation equipment. Machines, 9 (7). UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kumari, Sarla and Ariyarathna, Thilanga and AL-Rawi, Mohammad and Ross, Joseph (2020) Enhancing Active Learning in Challenging World: Simple Strategies. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Chand, Praneel (2020) Implementing project based learning and tools to develop employability skills for early tertiary learners in engineering education. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Khanna, Jai and Chand, Praneel and AL-Rawi, Mohammad (2020) Implementing project based learning and tools to develop employability skills for early tertiary learners in engineering education. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Auckaili, Amar (2020) Literature review: Effective teamwork and team diversity in engineering education. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Chand, Praneel and AL-Rawi, Mohammad and Khanna, Jai (2020) Utilizing digital assessment strategies for theory & practical work in mechatronics. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Khanna, Jai and Chand, Praneel and AL-Rawi, Mohammad (2020) Utilizing digital assessment strategies for theory & practical work in mechatronics. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Sharma, Chetan and Zhou, Hong (2020) Optimization of pipeline reducer using computational fluid dynamics (CFD) modelling. Indian Journal of Science and Technology, 13 (45). pp. 4521-4531. ISSN 0974-6846 (In Press) UNSPECIFIED

Kumari, Sarla and Al-Jumaily, Ahmed and AL-Rawi, Mohammad (2020) Frequency response of lung. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Oumssount, Abderrahmane (2020) One-Way fluid structure interaction of a go-kart spoiler using CFD analysis. Proceedings 2020, 49 (1). UNSPECIFIED

Zhou, Hong and Peng, Cheng and Liu, Zhi and AL-Rawi, Mohammad and Khanna, Jai (2020) Titanium coatings plasma-sprayed with/without a shroud. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Zhou, Hong and AL-Rawi, Mohammad and Peng, Cheng and Liu, Zhi (2020) Titanium coatings plasma-sprayed with/without a shroud. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Ariyarathna, Thilanga and Kumari, Sarla and AL-Rawi, Mohammad (2020) Building connections with new teaching and learning approaches. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kumari, Sarla and Ariyarathna, Thilanga and AL-Rawi, Mohammad and Khanna, Jai (2020) Building connections with new teaching and learning approaches. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonbay, Annette and Khanna, Jai and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla (2019) Incorporating effective teaching pedagogies to improve learning and teaching approaches globally. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Moridnejad, Maryam and Kumari, Sarla (2019) Incorporating effective teaching pedagogies to improve learning and teaching approaches globally. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kumari, Sarla and AL-Rawi, Mohammad and Khanna, Jai and Moridnejad, Maryam (2019) Motivation and Engagement: Māori and Pasifika learners. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Kumari, Sarla and AL-Rawi, Mohammad (2019) Motivation and engagement: Māori and Pasifika learners. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Daniel, Scott and AL-Rawi, Mohammad and Pearson, Ashlee and Symes, Mark and Goldfinch, Tom (2019) WORKSHOP: Stop lecturing about active learning: integrating good teaching practices into AAEE conference sessions. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Chakrabarti, Bhujanga B. and AL-Rawi, Mohammad (2019) Modelling of Firm Offer from Combined Wind and Hydro Generations. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Chakrabarti, Bhujanga and Phillips, Brent and AL-Rawi, Mohammad and Kumari,, Sarla and Althobaiti, Thamer (2019) Modelling of firm offer from combined wind and hydro generations. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Zheng, Li and Ewart, Paul and Best, Russell (2019) Aerodynamic effect of Polo Helmet — A CFD study. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul and AL-Rawi, Mohammad and Kim, Hyun-Chan (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Smith, Callan and Ewart, Paul (2019) Residential air quality improvement using UV lights. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Mylarapu, Akhil and Khanna, Jai (2019) Thermal Power Stirling - Green Heat Engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Mylarapu, Akhil (2019) Thermal power stirling: Green heat engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad (2018) The Australasian association for engineering education. [Organising or hosting a conference, workshop or other event] UNSPECIFIED

AL-Rawi, Mohammad (2018) Engineers for the future; accounting for diversity. [Facilitating a session at a conference, workshop or other event] UNSPECIFIED

AL-Rawi, Mohammad (2018) Reflecting on our own learning: incorporating diverse worldviews into teaching and learning activities. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Khanna, Jai and Lazonbay, Annette (2018) Reflecting on our own learning: incorporating diverse worldviews into teaching and learning activities. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad (2018) Residential air quality improvement system. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Smith, Callan (2018) Residential air quality improvement system: For healthy living. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonbay, Annette (2017) A new strategy for active learning to maximise performance in intensive courses. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad (2017) Chair a session/Integration of theory and practice in the learning and teaching process. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonbay, Annette (2016) Integrating Learning Outcomes of Student Final Year Project with Objectives of a Research Project: Designing an All-In-One System for Climate Control and Air Purification. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Al-Jumaily, Ahmed (2016) Assessing abdominal aorta narrowing using computational fluid dynamics. Medical & Biological Engineering & Computing, 54. pp. 843-853. ISSN 1741-0444 UNSPECIFIED