Search for collections on Wintec Research Archive

Items where Subject is "T Technology (General)"

Group by: Creators | Item Type
Jump to: A | B | C | E | F | H | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 168.

A

AL-Rawi, Mohammad (2021) Residential IEQ improvement using UVGI lights and carbon fibre filters: Mould and relative humidity assessments. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad (2021) The thermal comfort sweet-spot: A case study in a residential house in Waikato, New Zealand. Case Studies in Thermal Engineering, 28 (101530). ISSN 2214157X UNSPECIFIED

AL-Rawi, Mohammad (2021) The thermal comfort sweet-spot: A case study in a residential house in Waikato, New Zealand. Case Studies in Thermal Engineering. ISSN 2214157X (In Press) UNSPECIFIED

AL-Rawi, Mohammad and Al-Jumaily, Ahmed (2016) Assessing abdominal aorta narrowing using computational fluid dynamics. Medical & Biological Engineering & Computing, 54. pp. 843-853. ISSN 1741-0444 UNSPECIFIED

AL-Rawi, Mohammad and Auckaili, Amar and Lazonbay, Annette (2021) The role of academic development (Research and Teaching) in enabling quality teaching. [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai (2021) Aligning research objectives with student learning outcomes and sustainability objectives in student engineering development project. [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai and Kumari, Sarla (2021) Developing Soft Skills to produce Work-Ready International Graduate Diploma Students in Engineering: a Comparative Study. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai and Kumari, Sarla (2021) Developing soft skills to produce work-ready international graduate diploma students in engineering: A comparative study. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Ikutegbe, Charles and Auckaili, Amar and Farid, Mohammed (2021) Sustainable Technologies to improve Indoor Air Quality in a Residential House – a Case Study in Waikato, New Zealand- Q1 - Impact Factor = 5.879. Energy and Buildings. (In Press) UNSPECIFIED

AL-Rawi, Mohammad and Kumari, Sarla and Khanna, Jai and Ariyarathna, Thilanga (2021) Designing a research project that meets industry-defined student learning outcomes. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonby, Annette and Smith, Callan (2021) Low-cost residential air quality device using ultraviolet germicidal irradiation (UVGI) light. [Software or database] UNSPECIFIED

AL-Rawi, Mohammad and Oumssount, Abderrahmane (2020) One-Way fluid structure interaction of a go-kart spoiler using CFD analysis. Proceedings 2020, 49 (1). UNSPECIFIED

AL-Rawi, Mohammad and Sharma, Chetan and Zhou, Hong (2020) Optimization of pipeline reducer using computational fluid dynamics (CFD) modelling. Indian Journal of Science and Technology, 13 (45). pp. 4521-4531. ISSN 0974-6846 (In Press) UNSPECIFIED

Abuaiadah, Diab and Switzer, Alexander and Bosu, Michael Franklin and Yun, Liu (2022) Automatic counting of chickens in confined area using the LCFCN algorithm. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ahmed, Monjur (2017) SUPA: Strewn User-Preserved Authentication. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Ahmed, Monjur (2018) SUPA: Strewn user-preserved authentication**. Global Journal of Engineering and Technology Review, 3 (1). pp. 10-15. ISSN Retrieved from http://www.gjetr.org/ UNSPECIFIED

Ahmed, Monjur and Jaidka, Sapna and Sarkar, Nurul I. (2020) Security in Decentralised Computing, IoT and Industrial IoT. In: Industrial IoT Challenges, Design Principles, Applications, and Security. Springer, Cham, Springer Nature Switzerland AG 2020, pp. 191-211. ISBN 978-3-030-42500-5 UNSPECIFIED

Ahmed, Monjur and Jaidka, Sapna and Sarkar, Nurul I. (2020) Security in decentralised computing, IoT and industrial IoT. In: Industrial IoT: Challenges, design principles, applications, and security. Springer International Publishing, pp. 191-211. ISBN 978303042500-5 UNSPECIFIED

Ahmed, Monjur and Litchfield, Alan T (2019) CORP: An algorithm to prevent unauthorized data modification using collaborative nodes. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ahmed, Monjur and Petrova, Krassie (2020) A zero-trust federated identity and access management framework for cloud and cloud-based computing environments. [Item presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Ahmed, Monjur and Sarkar, Nurul I. (2020) Privacy in cloud-based computing. In: Social, Legal, and Ethical Implications of IoT, Cloud, and Edge Computing Technologies. IGI Global, pp. 239-252. UNSPECIFIED

Ahmed, Monjur and Sarkar, Nurul I. (2020) Security in Cloud-based IoT. In: Cloud Network Management: An IoT Based Framework. Routledge & CRC Press. ISBN 9780367256050 (In Press) UNSPECIFIED

B

Best, Russell (2022) Perspectives: The player-pony dyad in Polo, lessons from other sports and future directions. Animal Frontiers. (In Press) UNSPECIFIED

Best, Russell and Standing, Regan J (2019) All things being equal: Spatiotemporal differences between open and women’s 16-goal polo. Preprints. UNSPECIFIED

Best, Russell and Standing, Regan J (2019) The spatiotemporal characteristics of 0 – 24 goal polo. Preprints. UNSPECIFIED

Best, Russell and Standing, Regan J (2019) The spatiotemporal characteristics of 0–24-goal polo. Animals, 9 (7). p. 446. UNSPECIFIED

C

Chand, Praneel and AL-Rawi, Mohammad and Khanna, Jai (2020) Utilizing digital assessment strategies for theory & practical work in mechatronics. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

Citizen, Joe (2020) Creative art at the hyphen in Aotearoa-New Zealand. Tōia Mai: A partnership project. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Citizen, Joe (2014) Eye knew new - navigating world views in panorama. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Citizen, Joe (2015) Punking the panopticon. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Citizen, Joe (2019) Tōia Mai: Speculating art and reality at the hyphen in Aotearoa-New Zealand. ['eprint_fieldopt_thesis_type_phd' not defined] thesis, UNSPECIFIED. UNSPECIFIED

Citizen, Joe and Clark, Natalie Maria and Macpherson, Kent and Berry, Megan and Thorne, Rob and Cruse, Jaimee (2015) {presence} an interactive dance event. [Media arts item] UNSPECIFIED

Citizen, Joe and Cook, David and Long, Jason and Macpherson, Kent and McConnell, Luke and Nelson, Paul and Nicholls, Simon and Purdom, Mark and Veling, Tim J. and Williams, Naomi V and Young, Stefanie A (2014) Survey Hamilton. [Contribution to a Show/Exhibition] UNSPECIFIED

Citizen, Joe and Elliott, Zena and Nicholls, Antony and Long, Jason (2015) He whare kōrero, he māramatanga. [Media arts item] UNSPECIFIED

Citizen, Joe and Hattingh, Gert and Fendall, Andy and Long, Jason (2016) The Waikato Matrix. [Media arts item] UNSPECIFIED

Citizen, Joe and Long, Jason (2014) Oh yes we are. [Contribution to a Show/Exhibition] UNSPECIFIED

Citizen, Joe and Long, Jason (2016) Silence is Golden. [Contribution to a Show/Exhibition] UNSPECIFIED

Citizen, Joe and Long, Jason and Mayall, Jeremy Mark (2016) Glimmer: Interactive installation. [Contribution to a Show/Exhibition] UNSPECIFIED

Citizen, Joe and Macpherson, Kent and Long, Jason and Nicholls, Simon and Nelson, Paul (2013) Revolutionary Acts. [Contribution to a Show/Exhibition] UNSPECIFIED

Citizen, Joe and Nicholls, Simon and Long, Jason and Rogerson-Berry, Megan (2013) Cassandra's voice. [Contribution to a Show/Exhibition] UNSPECIFIED

Clokie, Trish and Brown, Cheryl (2007) From wo to go: Contextualising and reusing multimedia. In: eFest 2007: Making the change real. eFest. UNSPECIFIED

E

Ewart, Paul (2017) 2017 Student projects in support of final year BEngTech students at Wintec. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul (2020) CEID research: Recent, current and future direction. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2017) Competition V Connectivity in the Market Place. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2020) Design-build-use. Expansion in the Waikato. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Ewart, Paul (2018) Presentation to Technical University of Liberec academic and research staff. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2020) Surface engineering by titanium particulate injection mounding. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2019) A comparison of processing techniques for producing prototype injection moulding inserts. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2018) The particulate injection moulding fabrication process: Are micro-scale products viable. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2020) A review of equestrian polo and a methodology for testing the mechanical properties of the mallet. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Ewart, Paul (2018) The use of particulate injection moulding for fabrication of sports and leisure equipment from titanium metals. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul and Alghamdi, Majed and Bakelka, Omar and Alqahtani, Saeed (2017) Enabling Development; design of a the Single Seat Wintec Electric Vehicle.(SSWEV). [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Capek, Lukas (2018) Erasmus mobility project collaboration. Nil. (Unpublished) UNSPECIFIED

Ewart, Paul and He, Jianan (2018) Design pipe bracket for vessel with using Titanium metal in marine environment. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Huang, Jiarui (2018) The Development of an Aerodynamic Body System for the Existing Single Seat Electric Vehicle. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Louie, Ken (2019) Supporting community engagement through teaching, student projects and research. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul and Travieso, Freddy (2018) Designing and Manufacturing of a hand operated plastic injection moulding machine envisioned for the mesoscale range. [Undergraduate student work] (Unpublished) UNSPECIFIED

F

Fendall, Andy and Hunt, Tim D. and Rajendran, Dileep and Nikora, Mark (2015) Assisted Living: Domestic Power Monitoring utilising Home Automation Products and Cloud Storage. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Flynn, Cormac (2016) AB-16-2316 Review. Elsevier. (Submitted) UNSPECIFIED

Flynn, Cormac (2016) CEID research forum: Hitoshi Mitzuno. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Flynn, Cormac (2016) Research Seminar Marek Kovar, Technical University of Liberec. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Flynn, Cormac (2016) Research Seminar: Mohammad Al-Rawi and Thomas Vuong, MIT. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Flynn, Cormac (2016) Review of ABME-D-16-00586. Springer. (Unpublished) UNSPECIFIED

Flynn, Cormac (2016) Skins, scars, wrinkles, and robots: characterising the mechanical properties of human skin. N/A. (Unpublished) UNSPECIFIED

Flynn, Cormac and Nazari, Mohammad Ali and Perrier, Pascal and Fels, Sid and Nielsen, Poul and Payan, Yohan (2016) Face. In: Biomechanics of Living Organs. Elsevier. ISBN 9780128040096 (Submitted) UNSPECIFIED

Flynn, Cormac and Stavness, Ian and Lloyd, John and Fels, Sid (2015) A finite element model of the face including an orthotropic skin model under in vivo tension. Computer Methods in Biomechanics and Biomedical Enngineering, 18. pp. 571-582. UNSPECIFIED

Flynn, Cormac and Taberner, Andrew and Fels, Sid and Nielsen, Poul (2016) Comparison of anisotropic models to simulate the mechanical response of facial skin. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

H

Harris, Trudy and Bigham, Aidan (2014) The use of project based learning in engineering fundamentals. Proceedings of the 2014 AAEE Conference. UNSPECIFIED

Hooker, Tracey (2017) Adults and children engaging with eportfolios in an early childhood education setting. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Hooker, Tracey (2017) The Power of Portfolios: Adults and Children engaging with ePortfolios in an early childhood education setting. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Hooker, Tracey (2015) Using E-Portfolios for formative assessment and parent engagement in early childhood education. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Hunt, Tim D. (2019) Bring the bird music back across New Zealand part of Smart Hamilton Smart Space. [Contribution to a Show/Exhibition] UNSPECIFIED

Hunt, Tim D. (2018) Cacophonometer setup instructions. The Cacophony Project. UNSPECIFIED

Hunt, Tim D. (2018) Cacophonometer update. The Cacophony Project. UNSPECIFIED

Hunt, Tim D. (2019) The Cacophony Project on Maungatautari. Maunga Matters Newsletter. UNSPECIFIED

Hunt, Tim D. (2019) The Cacophony Project: Moore’s Law for New Zealand’s Birds. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Hunt, Tim D. (2019) Eye on nature: The cacophony project. [Contribution to a Show/Exhibition] UNSPECIFIED

Hunt, Tim D. (2020) Hammond Park Morepork (Ruru) Dataset. [Dataset] (Unpublished) UNSPECIFIED

Hunt, Tim D. (2020) How to find a Morepork. The Cacophony Project. UNSPECIFIED

Hunt, Tim D. (2016) Is that what they said? An automated reference finder. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Hunt, Tim D. (2019) Listening to the birds in the Waikato. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Hunt, Tim D. (2007) Mifrenz: A new email client application for children. In: NACCQ07: Proceedings of the 20th Annual Conference of the National Advisory Committee on Computing Qualifications. National Advisory Committee on Computing Qualifications, Hamilton, New Zealand, pp. 99-105. UNSPECIFIED

Hunt, Tim D. (2019) Morepork Time in Hammond Park! [Newspaper article] UNSPECIFIED

Hunt, Tim D. (2020) Telepresence: Time to take a close look. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Hunt, Tim D. and Cartner, Marg and Menon, Sreelatha (2011) Using email to teach literacy. In: Proceedings of the 2nd Annual Conference of Computing and Information Technology Research and Education in New Zealand (CITRENZ): Incorporating the 24th Annual Conference of the National Advisory Committee on Computing Qualifications. Computing and Information Technology Research and Education in New Zealand, pp. 306-307. UNSPECIFIED

Hunt, Tim D. and Nikora, Mark (2019) Bird monitor: Cacophony. [Software or database] UNSPECIFIED

Hunt, Tim D. and Nikora, Mark and Blackbourn, Chris (2019) Analysis of morepork vocalizations recorded using a permanently located mobile phone. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Hunt, Tim D. and Rajendran, Dileep and Nikora, Mark and Bennett, Susan and Fendall, Andy (2014) An Assisted Living application utilizing electricity consumption. [Software or database] UNSPECIFIED

Hunt, Tim D. and Rajendran, Dileep and Nikora, Mark and Bennett, Susan and Fendall, Andy (2015) Off-the-shelf Non-Intrusive Load Monitoring Devices Utilised in a Low Activity Detection Service. [Paper presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

Hunt, Tim D. and Rajendran, Dileep and Nikora, Mark and Bennett, Susan and Fendall, Andy (2016) Off-the-shelf Non-Intrusive Load Monitoring Devices Utilised in a Low Activity Detection Service. Ariadna; cultura, edcacion y tecnologia, 3 (May). pp. 41-46. ISSN 2340-7719 UNSPECIFIED

Hunt, Tim D. and Rajendran, Dileep and Nikora, Mark and Bennett, Susan and Fendall, Andy (2014) A minimally intrusive monitoring system that utilizes electricity consumption as a proxy for wellbeing. Journal of Applied Computing and Information Technology, 18 (2). ISSN 2230-4398 UNSPECIFIED

Hunt, Tim D. and Wickham, Heather and Murphy, Kathy and Elrick, Michael (2003) Selection of an internet content filtering solution using the analytic hierarchy process. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

J

Jaidka, Sapna and Reeves, Steve and Bowen, Judy (2019) Formal modelling of safety-critical interactive devices using coloured petri nets. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Jaidka, Sapna and Reeves, Steve and Bowen, Judy (2019) A coloured petri net approach to model and analyze safety-critical interactive systems. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Jull, Harrisson and Ewart, Paul and Kunnemeyer, Rainer and Schaare, Peter (2017) Selective Surface Sintering Using a Laser-Induced Breakdown Spectroscopy System. Journal of Spectroscopy, 2017. UNSPECIFIED

K

Kaur, Sandeep (2021) Online learning factors that influence the student’s learning outcomes. [Graduate student work] (Unpublished) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Dabholkar, Ninad (2021) Generation of Biogas using Fixed-Dome Anaerobic Digester for Small-Scale Industrial Applications in New Zealand. [Poster presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla and Ariyarathna, Thilanga (2021) Designing a research project that meets industry-defined student learning outcomes. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Mylarapu, Akhil (2019) Thermal power stirling: Green heat engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and Ariyarathna, Thilanga and Kumari, Sarla and AL-Rawi, Mohammad (2020) Building connections with new teaching and learning approaches. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Bigham, Aidan (2021) The development of personal growth, self-awareness & graduate attributes in engineering & design factory students – Part 1. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Chand, Praneel and AL-Rawi, Mohammad (2020) Implementing project based learning and tools to develop employability skills for early tertiary learners in engineering education. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Chand, Praneel and AL-Rawi, Mohammad (2020) Utilizing digital assessment strategies for theory & practical work in mechatronics. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Kim, Hyun-Chan (2021) How Tertiary Students Managed their Learning During the COVID – 19 Lockdown Periods: Findings from the Learner Management System (Moodle). [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Kumari, Sarla and AL-Rawi, Mohammad (2019) Motivation and engagement: Māori and Pasifika learners. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Zhou, Hong and AL-Rawi, Mohammad and Peng, Cheng and Liu, Zhi (2020) Titanium coatings plasma-sprayed with/without a shroud. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Prashant (2018) Social Media Security for the New Age Business (NZ Specific). [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Kumari, Sarla and AL-Rawi, Mohammad (2021) Collaborating for a changing future in education. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Kumari, Sarla and Ariyarathna, Thilanga and AL-Rawi, Mohammad and Khanna, Jai (2020) Building connections with new teaching and learning approaches. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Kumari, Sarla and Ariyarathna, Thilanga and AL-Rawi, Mohammad and Ross, Joseph (2020) Enhancing Active Learning in Challenging World: Simple Strategies. [Paper presented at a conference, workshop or other event, and published in the proceedings] (In Press) UNSPECIFIED

L

Liu, Mark and Nicholls, Simon (2012) Coalesce. [Contribution to a Show/Exhibition] UNSPECIFIED

Liu, Mark and Nicholls, Simon (2012) Fieldays exhibitor. UNSPECIFIED, Hamilton, New Zealand. UNSPECIFIED

M

Mandelberg, John and Geng, Zetian (2015) Masters Zetian Geng (Tony). [Graduate student work] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Chesham, Aaron (2019) PreSHər (pressure). [Performance] UNSPECIFIED

Mayall, Jeremy Mark and Chesham, Aaron (2020) Walk of light. [Performance] UNSPECIFIED

Mayall, Jeremy Mark and Lamusse, Michael (2019) Tree of light. [Performance] UNSPECIFIED

Mayall, Jeremy Mark and Long, Jason and Citizen, Joe (2016) Glimmer - Hamilton Fringe 2016. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Berry, Megan and Mizoguchi, Haruko and Bradley, Paul (2016) Wild Sonic Blooms. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2016) Illuminated Stillness. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2017) To Sleep - Hamilton Gardens Arts Festival 2017. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2016) To Sleep - World Premiere. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2016) "dawn 1". [Performance] UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2017) A dawn spark. [Composition] UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul (2016) "twilight 1" - International Piano Day. [Performance] (Unpublished) UNSPECIFIED

Mayall, Jeremy Mark and Macpherson, Kent and Levy, Yotam and Bradley, Paul and Horo, Horomona (2016) "dusk 1". [Performance] (Unpublished) UNSPECIFIED

N

Nikora, Mark (2015) Off the Shelf Non-intrusive Load Monitoring Devices Utilised in a Low Activity Detection Service. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

O

Ouseph, Sanjo Vincent Vadakkechundeveli and Valle, Arthur M. (2021) A modern paradigm for cloud computing adoption that brings into account the deployment organization's main concerns. [Paper presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

P

Philip, Matt and Ewart, Paul (2020) Engineering gone wild. Cutting edge techniques for polo. [Journal item] UNSPECIFIED

Potgieter, Christo and Fouche, Annette (2011) When worlds collide - Making Star Trek happen! In: Proceedings of the 2nd Annual Conference of Computing and Information Technology Research and Education in New Zealand (CITRENZ): Incorporating the 24th Annual Conference of the National Advisory Committee on Computing Qualifications. Computing and Information Technology Research and Education in New Zealand, pp. 344-345. UNSPECIFIED

R

Rajendran, Dileep (2007) Linux networking in NZ industry and ITP education. In: NACCQ07: Proceedings of the 20th Annual Conference of the National Advisory Committee on Computing Qualifications. National Advisory Committee on Computing Qualifications, Hamilton, New Zealand, pp. 223-227. UNSPECIFIED

Rajendran, Dileep (2008) Longitudinal study of Linux Networking in NZ industry and ITP education. The New Zealand Journal of Applied Computing and Information Technology (NZJACIT), 12 (1). pp. 73-80. ISSN 1174-0175 UNSPECIFIED

Roberton, Garry and Bennett, Susan (2008) Mytec: Wintec student information portal. In: Proceedings of the Twenty First Annual Conference of the National Advisory Committee on Computing Qualifications. National Advisory Committee on Computing Qualifications, p. 356. UNSPECIFIED

Robertson, Jan (2013) Flickr - photos and videos 1 TB space. How to use it effectively. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Rsetam, Kamal and AL-Rawi, Mohammad and Cao, Zhenwei (2022) Robust composite temperature control of electrical tube furnaces by using disturbance observer. Case Studies in Thermal Engineering, 30 (101781). ISSN 2214157X UNSPECIFIED

Ryan, Shaun and Hunt, Tim D. (2020) Part of 'AI to protect NZ birds': Bird classification open source contributers. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

S

Saravani, Sarah-Jane and Haddow, Gaby (2014) Does position within the Library affect mobile technology acceptance? [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Sarkar, Nurul I. and Singh, Dev Pal and Ahmed, Monjur (2021) A survey on energy harvesting wireless networks: Channel capacity, scheduling, and transmission power optimization. MDPI Electronics. (In Press) UNSPECIFIED

T

Taylor, Jonathan and Atkinson, Greg and Best, Russell (2021) Paced to perfection: Exploring the potential impact of WaveLight Technology in athletics. The Sport and Exercise Scientist, 68 (Summer). pp. 8-9. UNSPECIFIED

Te Huia, Maria and Kate, Yeo (2017) Delivering education to RNs across the Waikato – a new insight into reaching health professional communities for ongoing clinical education. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Tennant, Heather (2010) How to create a virtual library tour. In: LIANZA Waikato/BOP Region Weekend School 2010, 30 April - 2 May, 2010, Whakatane, New Zealand. (Unpublished) UNSPECIFIED

W

Wu, Shaoqun and Li, Liang and Witten, Ian and Yu, Alex (2016) Constructing a Collocation Learning System from the Wikipedia Corpus. Constructing a Collocation Learning System from the Wikipedia Corpus, 6 (3). UNSPECIFIED

Y

Yu, Alex (2018) Facilitating academic words learning: a data-driven approach using a collocation consultation system built from open access research papers. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Yu, Alex and Wu, Shaoqun and Witten, Ian and König, Jemma (2016) Learning Collocations with FLAX Apps. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Z

Zhou, Hong (2022) Application of pure titanium coatings for medical purposes. [Poster presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong (2008) Effect of Plasma Spraying Process on Microstructure and Microhardness of Titanium Alloy Substrate. Journal of Thermal Spray Technology, 17 (2). pp. 284-288. ISSN 1059-9630 UNSPECIFIED

Zhou, Hong (2021) Effect of shroud in plasma spraying on chemical composition and thickness of titanium coatings. Coatings, 11 (446). pp. 1-9. ISSN 079-6412 UNSPECIFIED

Zhou, Hong (2021) Fabrication of titanium coatings for medical device applications. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong (2018) An Introduction on 2018 research work. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Zhou, Hong (2016) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. Key Engineering Materials, 723. pp. 247-251. ISSN 1662-9795 UNSPECIFIED

Zhou, Hong (2016) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. [Poster presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Zhou, Hong (2016) Microstructural Characterization of Thermal Barrier Coatings by High Power Laser Glazing. [Paper presented at a conference, workshop or other event, and published in the proceedings] (Unpublished) UNSPECIFIED

Zhou, Hong (2020) Optimization of pipeline reducer using computational fluid dynamics (CFD) modelling. Indian Journal of Science and Technology, 13. pp. 4521-4531. UNSPECIFIED

Zhou, Hong (2020) Plasma sprayed titanium coatings with/without a shroud. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Zhou, Hong (2019) Porosity and Micro-Hardness of Shrouded Plasma Sprayed Titanium Coatings. Key Engineering Materials, 793. pp. 73-77. ISSN 1662-9795 UNSPECIFIED

Zhou, Hong (2018) Porosity and micro-hardness of shrouded plasma sprayed titanium coatings. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Zhou, Hong (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong (2015) Thermal Sprayed coatings. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Zhou, Hong (2012) Titanium and Titanium alloy Coatings for Corrosion Protection. Proceedings of the 12th World Conference on Titanium, 3. UNSPECIFIED

Zhou, Hong (2019) A comparison of processing techniques for producing prototype injection moulding inserts. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong (2022) A novel early warning system (EWS) for water quality, integrating a high-frequency monitoring database with efficient data quality control technology at a large and deep lake (Lake Qiandao), China. Water, 14 (602). pp. 1-13. ISSN 2073-4441 UNSPECIFIED

Zhou, Hong and Ewart, Paul (2019) Microstructural Characterization of Shrouded Plasma Sprayed Titanium Coatings. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong and Li, Fei and Wang, Jun and De Sun, Bao (2016) Microstructure characterization of thermal barrier coatings glazed by a high powder laser. Key Engineering Materials, 723. pp. 247-251. UNSPECIFIED

Zhou, Hong and Liu, Zhi (2019) Microstructural Characterization of Shrouded Plasma-Sprayed Titanium Coatings. J. Manuf. Mater. Process., 3 (1). ISSN 2504-4494 UNSPECIFIED

This list was generated on Tue Nov 12 01:30:27 2024 UTC.