Book Chapter

Kim, Hyun-Chan and Nicholson, Alan and Kusumastuti, Diana (2014) Freight Transport Mode Choice and Mode Shift in New Zealand: Findings of a Revealed Preference Survey. In: Sustainable Logistics. Emerald Group Publishing Limited, UK, pp. 165-192. ISBN 978-1-78441-062-9 UNSPECIFIED

Paper presented at a conference, workshop or other event, and published in the proceedings

AL-Rawi, Mohammad (2018) Reflecting on our own learning: incorporating diverse worldviews into teaching and learning activities. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Chand, Praneel and Khanna, Jai and Kumari, Sarla (2021) Developing soft skills to produce work-ready international graduate diploma students in engineering: A comparative study. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Lazonbay, Annette and Khanna, Jai and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

AL-Rawi, Mohammad and Smith, Callan and Ewart, Paul (2019) Residential air quality improvement using UV lights. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Bigham, Aidan (2014) Disaster week: A case study immersing first year engineering students in a disaster context to measure communication skills. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Daniel, Scott and AL-Rawi, Mohammad and Pearson, Ashlee and Symes, Mark and Goldfinch, Tom (2019) WORKSHOP: Stop lecturing about active learning: integrating good teaching practices into AAEE conference sessions. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2018) The use of particulate injection moulding for fabrication of sports and leisure equipment from titanium metals. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul and AL-Rawi, Mohammad and Kim, Hyun-Chan (2019) Reducing risk in pre-production investigations through undergraduate engineering projects. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul and Louie, Ken and Zhou, Hong (2019) Supporting community engagement through teaching, student projects and research. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla (2019) Incorporating effective teaching pedagogies to improve learning and teaching approaches globally. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Kumari, Sarla and Moridnejad, Maryam (2019) Assessing Group Project for Fluids Power and Advanced Fluid Mechanics Paper. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Moridnejad, Maryam and Kumari, Sarla (2019) Incorporating effective teaching pedagogies to improve learning and teaching approaches globally. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Khanna, Jai and Kumari, Sarla and AL-Rawi, Mohammad (2019) Motivation and engagement: Māori and Pasifika learners. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kim, Hyun-Chan and Nicholson, Alan (2013) Freight Transport Modal Shift in NZ: Building Understanding of Shippers’ Mode Choice based on RP (revealed preference)/ SP (stated preference) surveys. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kim, Hyun-Chan and Nicholson, Alan (2012) Mode Choice in Freight Transport in New Zealand: Findings of a Revealed Preference (RP) Survey of Shippers. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kim, Hyun-Chan and Yuxin, Zhang (2017) A Study of Road Accidents Involving International Visitors: Case Study in New Zealand. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Kumari, Sarla and AL-Rawi, Mohammad and Khanna, Jai and Moridnejad, Maryam (2019) Motivation and Engagement: Māori and Pasifika learners. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Moridnejad, Maryam (2018) The occurrence and origin of salinity in non-coastal groundwater in the Waikato region. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong and Li, Fei and Wang, Jun and Sun, Baode (2016) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Media arts item

Citizen, Joe (2018) Toia Mai: Interactive sculpture. [Media arts item] (Submitted) UNSPECIFIED

Other

Ewart, Paul and Capek, Lukas (2018) Erasmus mobility project collaboration. Nil. (Unpublished) UNSPECIFIED

Journal article

Chand, Praneel and AL-Rawi, Mohammad and James, Sebin and Antony, Joseph and Jose, Jobin (2021) A low-cost system for remote access and control of automation equipment. Machines, 9 (7). UNSPECIFIED

Kim, Hyun-Chan and Nicholson, Alan and Kusumastuti, Diana (2017) Analysing freight shippers' mode choice preference heterogeneity using latent class modelling. Transportation Research Procedia, 25. pp. 1109-1125. ISSN 2352-1465 UNSPECIFIED

Moridnejad, Maryam (2019) Stream temperature modeling and fiber optic temperature sensing to characterize groundwater discharge. Groundwater. ISSN 1745-6584 UNSPECIFIED

Zhou, Hong and Li, Fei and Wang, Jun (2018) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. Key Engineering Materials. (In Press) UNSPECIFIED

Contribution to a Show/Exhibition

Citizen, Joe (2018) Prototypical. [Contribution to a Show/Exhibition] UNSPECIFIED

Facilitating a session at a conference, workshop or other event

AL-Rawi, Mohammad (2018) Engineers for the future; accounting for diversity. [Facilitating a session at a conference, workshop or other event] UNSPECIFIED

Bigham, Aidan and Harris, Trudy (2014) Course design for student centered learning. [Facilitating a session at a conference, workshop or other event] (Submitted) UNSPECIFIED

Favourable review or citation

UNSPECIFIED (2018) Member spotlight on Paul D. Ewart. [Favourable review or citation] UNSPECIFIED

Item presented at a conference, workshop or other event which was not published in the proceedings

Ewart, Paul (2020) CEID research: Recent, current and future direction. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2017) Competition V Connectivity in the Market Place. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2015) Overview of previous and current research and industry some developments. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2018) Presentation to Technical University of Liberec academic and research staff. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Roodt, Henk (2015) Developing Sustainable Business?: The TS Farming Solutions Case. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Zhou, Hong (2015) Thermal Sprayed coatings. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Organising or hosting a conference, workshop or other event

AL-Rawi, Mohammad (2018) The Australasian association for engineering education. [Organising or hosting a conference, workshop or other event] UNSPECIFIED

Ewart, Paul (2018) CEID Research Symposium Series. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Ewart, Paul (2020) Design-build-use. Expansion in the Waikato. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Ewart, Paul and Claus, Joens (2018) Thermal processing in powder metallurgy. Metal injection moulding and binder jetted metal 3D printing. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Paper presented at a conference, workshop, or other event which was not published in the proceedings

AL-Rawi, Mohammad and Mylarapu, Akhil and Khanna, Jai (2019) Thermal Power Stirling - Green Heat Engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Bigham, Aidan (2015) Distance learning - making activity the centre. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Mylarapu, Akhil (2019) Thermal power stirling: Green heat engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and Kim, Hyun-Chan (2020) Engineering research showcase: Cross-disciplinary engineering projects for improving learners’ capabilities and community. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Kim, Hyun-Chan (2015) Discrete Choice Modelling: How good is the model? [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Kim, Hyun-Chan (2017) Sustainable Urban Development - Implementation of Car-free Zone: NZ Case Studies. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Phillips, Brent (2019) Embedding Māori achievement: An innovative example. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Poster presented at a conference, workshop or other event which was not published in the proceedings

Ewart, Paul and Moridnejad, Maryam and Zhou, Hong and Chakrabarti, Bhujanga (2018) CEID research: Recent, current and future direction. [Poster presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Report

Chand, Praneel (2022) CEID Research Symposium 2022 Abstract Booklet. [Report] UNSPECIFIED

Kim, Hyun-Chan (2016) Traffic Impact Assessment and Proposal Report: Te Ara Hou Social Services Village, Hamilton. [Report] (Submitted) UNSPECIFIED

Undergraduate student work

Ewart, Paul and Alghamdi, Majed and Bakelka, Omar and Alqahtani, Saeed (2017) Enabling Development; design of a the Single Seat Wintec Electric Vehicle.(SSWEV). [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Huang, Jiarui (2018) The Development of an Aerodynamic Body System for the Existing Single Seat Electric Vehicle. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Travieso, Freddy (2018) Designing and Manufacturing of a hand operated plastic injection moulding machine envisioned for the mesoscale range. [Undergraduate student work] (Unpublished) UNSPECIFIED