Paper presented at a conference, workshop or other event, and published in the proceedings

AL-Rawi, Mohammad and Smith, Callan and Ewart, Paul (2019) Residential air quality improvement using UV lights. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2019) Surface irregularities in titanium marine parts formed by the particulate injection moulding process. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2018) The use of particulate injection moulding for fabrication of sports and leisure equipment from titanium metals. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul and Verbeek, Casparus J. and Seokyoung, Ahn (2017) Comparative Rheology Techniques for Assessment of MIM Titanium Metal Powder Feedstocks. [Paper presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Zhou, Hong and Li, Fei and Wang, Jun and Sun, Baode (2016) Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser. [Paper presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Other

Ewart, Paul and Capek, Lukas (2018) Erasmus mobility project collaboration. Nil. (Unpublished) UNSPECIFIED

Ewart, Paul and Duke, Mike (2017) Design and development of a single seat battery electric vehicle. NA. (Unpublished) UNSPECIFIED

Journal article

Rsetam, Kamal and AL-Rawi, Mohammad and Cao, Zhenwei (2022) Robust composite temperature control of electrical tube furnaces by using disturbance observer. Case Studies in Thermal Engineering, 30 (101781). ISSN 2214157X UNSPECIFIED

Contribution to a Show/Exhibition

Harman, Rebekah (2018) Stepping towards sustainable colour: Designing colouration processes that lower chemical and energy use during the wool dyeing process for carpet. [Contribution to a Show/Exhibition] UNSPECIFIED

Favourable review or citation

UNSPECIFIED (2018) Member spotlight on Paul D. Ewart. [Favourable review or citation] UNSPECIFIED

Item presented at a conference, workshop or other event, and published in the proceedings

Ewart, Paul (2019) A comparison of processing techniques for producing prototype injection moulding inserts. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Ewart, Paul (2018) The particulate injection moulding fabrication process: Are micro-scale products viable. [Item presented at a conference, workshop or other event, and published in the proceedings] UNSPECIFIED

Harman, Rebekah (2020) Unpicking the toxicity in activewear. [Item presented at a conference, workshop or other event, and published in the proceedings] (Unpublished) UNSPECIFIED

Item presented at a conference, workshop or other event which was not published in the proceedings

Ewart, Paul (2020) CEID research: Recent, current and future direction. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2017) Competition V Connectivity in the Market Place. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2018) Presentation to Technical University of Liberec academic and research staff. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Ewart, Paul (2020) A review of equestrian polo and a methodology for testing the mechanical properties of the mallet. [Item presented at a conference, workshop or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Hartley, Carl (2020) Development of innovative cross-disciplinary engineering showcase. [Item presented at a conference, workshop or other event which was not published in the proceedings] UNSPECIFIED

Organising or hosting a conference, workshop or other event

Ewart, Paul (2018) CEID Research Symposium Series. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Ewart, Paul (2020) Design-build-use. Expansion in the Waikato. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Ewart, Paul and Claus, Joens (2018) Thermal processing in powder metallurgy. Metal injection moulding and binder jetted metal 3D printing. [Organising or hosting a conference, workshop or other event] (Unpublished) UNSPECIFIED

Paper presented at a conference, workshop, or other event which was not published in the proceedings

AL-Rawi, Mohammad and Mylarapu, Akhil and Khanna, Jai (2019) Thermal Power Stirling - Green Heat Engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Ewart, Paul (2020) Surface engineering by titanium particulate injection mounding. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Khanna, Jai and AL-Rawi, Mohammad and Mylarapu, Akhil (2019) Thermal power stirling: Green heat engine. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] UNSPECIFIED

Khanna, Jai and Kim, Hyun-Chan (2020) Engineering research showcase: Cross-disciplinary engineering projects for improving learners’ capabilities and community. [Paper presented at a conference, workshop, or other event which was not published in the proceedings] (Submitted) UNSPECIFIED

Poster presented at a conference, workshop or other event, and published in the proceedings

Khanna, Jai and AL-Rawi, Mohammad and Dabholkar, Ninad (2021) Generation of Biogas using Fixed-Dome Anaerobic Digester for Small-Scale Industrial Applications in New Zealand. [Poster presented at a conference, workshop or other event, and published in the proceedings] (Submitted) UNSPECIFIED

Poster presented at a conference, workshop or other event which was not published in the proceedings

Ewart, Paul and Moridnejad, Maryam and Zhou, Hong and Chakrabarti, Bhujanga (2018) CEID research: Recent, current and future direction. [Poster presented at a conference, workshop or other event which was not published in the proceedings] (Unpublished) UNSPECIFIED

Undergraduate student work

Ewart, Paul (2017) Using titanium metal in a marine environment in conjunction with carbon fibre composites. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Alghamdi, Majed and Bakelka, Omar and Alqahtani, Saeed (2017) Enabling Development; design of a the Single Seat Wintec Electric Vehicle.(SSWEV). [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and He, Jianan (2018) Design pipe bracket for vessel with using Titanium metal in marine environment. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Huang, Jiarui (2018) The Development of an Aerodynamic Body System for the Existing Single Seat Electric Vehicle. [Undergraduate student work] (Unpublished) UNSPECIFIED

Ewart, Paul and Travieso, Freddy (2018) Designing and Manufacturing of a hand operated plastic injection moulding machine envisioned for the mesoscale range. [Undergraduate student work] (Unpublished) UNSPECIFIED